Temporary Work Restraint for Reinforced Concrete Frames and Temporary Works

During the construction of high-rise concrete structures a Temporary Edge Protection System will be incorporated into the falsework system offering collective protection to operatives working on the temporary structures perimeters but not when they are decking the support system out where they are significantly exposed to the potential of a fall due to the progression of their work and the resulting movement of the leading edge.

To protect these operatives from falling we offer both Fall Arrest (Alsipercha ) and Work Restraint systems specifically for this application.

Temporary Work Restraint Systems consist of components that allows movement within a safe working zone, without needing to transfer from one anchor point to another. When planned and installed the system provides a high level of safety and creates an area where four user’s can operative in a safe working zone and will consist of the following components.

A ScissorSafe Work Restraint System consists of:

  • Anchor Point – Webbing or Wire Rope Slings wrapped around column starter bars connected to a Temporary Horizontal Lifeline, maximum length 20 metres.
  • Connecting Device – Adjustable Work Positioning System, comprising a Lanyard, Rope Grab for adjustment and a length of Kermantle Rope providing the travel for the operative.
  • Body Connector – Safety harness with front & rear anchorage points

It is essential to ensure that all the components in a work restraint system are compatible.
Four workers have complete freedom of movement along the lifeline.

Temporary Work Restraint for Civil Engineering

During the construction of Composite bridges a Temporary Edge Protection System will be incorporated into the falsework system offering collective protection to operatives working on parapets but not when they are placing composite floor panels between beams. where they are significantly exposed to the potential of a fall due to the progression of their work and the resulting movement of the leading edge.

To protect these operatives from falling we propose a Work Restraint system specifically for this application.
Temporary Work Restraint Systems consist of components that allows movement within a safe working zone, without needing to transfer from one anchor point to another. When planned and installed the system provides a high level of safety and creates an area where four user’s can operative in a safe working zone and will consist of the following components.

A Scissorsafe Work Restraint System consists of:

  • Anchor Point – Webbing or Wire Rope Slings wrapped around shear studs or structural members connected to a Temporary Horizontal Lifeline, maximum length 20 metres.
    or Portable Anchors that are weighted to provide resistance compliant to EN 7095 Class B, onto which a Temporary Horizontal Lifeline is attached.
  • Connecting Device – Adjustable Work Positioning System, comprising a Lanyard, Rope Grab for adjustment and a length of Kermantle Rope providing the travel for the operative.
  • Body Connector – Safety harness with front & rear anchorage points.

It is essential to ensure that all the components in a work restraint system are compatible.

Temporary Work Restraint for Pre Cast Concrete

During the construction of multi-level Pre-Cast Structures a Temporary Edge Protection System will be installed around the perimeter’s offering collective protection but installers are at risk when they are placing composite floor sections onto beams or temporary supports. This is where they are exposed to the potential of a fall due to the progression of their work and the resulting movement of the leading edges.

To protect these operatives from falling we propose a Work Restraint system specifically for this application.
Temporary Work Restraint Systems consist of components that allows movement within a safe working zone, without needing to transfer from one anchor point to another. When planned and installed the system provides a high level of safety and creates an area where four user’s can operative in a safe working zone and will consist of the following components.

A Scissorsafe Work Restraint System consists of:

  • Anchor Point – Webbing or Wire Rope Slings wrapped around shear studs or structural members connected to a Temporary Horizontal Lifeline, maximum length 20 metres.
    or Portable Anchors that are weighted to provide resistance compliant to EN 7095 Class B, onto which a Temporary Horizontal Lifeline is attached.
  • Connecting Device – Adjustable Work Positioning System, comprising a Lanyard, Rope Grab for adjustment and a length of Kermantle Rope providing the travel for the operative.
  • Body Connector – Safety harness with front & rear anchorage points.

It is essential to ensure that all the components in a work restraint system are compatible.